Driver Power State Failure on Windows 10: FIXED

If you have seen the driver power state failure error on your Windows 10 PC, don’t worry. You’re not alone. You may experience this problem because of different reasons. In most cases, it’s due to issues related to power setting or driver. The good news is that fixing this problem is relatively easy. 

We’ve covered a few solutions on this post that should help you fix the problem. You don’t necessarily have to try every single one of them. Just work your way down the list until you find a solution that works for your PC.

 

Remove Your Peripherals

Your computer may not function properly and even cause the blue screen issues due to peripherals connected to the computer. So, you may want to disconnect all peripherals to see if the problem will be resolved. 

Here are the steps you need to follow:

1. Press and hold down the power button until your computer shuts down 
2. Disconnect all peripherals, i.e. scanner, printer, USB drive, mouse, etc. 
3. Try to power on your computer again 

If your computer runs without any issues, it means one of the peripherals you have removed is the culprit. Reinstall the devices one by one to test each one of them. This will allow you to identify the specific device that is causing the problem. 

Once you identify the problematic device, you can go ahead and replace it. Or, contact the device’s manufacturer for help. 

If the problem persists, try the solution next solution. 

 

Run the Windows Troubleshooter 

The troubleshooter is a built-in tool that can automatically identify and fix common issues on Windows 10. Here are the steps you need to follow to run the Windows troubleshooter:

1. Press the Windows key on your keyboard and type troubleshoot and hit Enter
2. Click on Blue Screen, and then on Run the troubleshooter

   

    

3. Wait for the troubleshooter to find and fix the problem, and reboot your computer.
4. Check if the issue persists. If it does, try the next solution below. 

 

Disable Power Saving 

You may also experience the drive power state failure due to issues related to power settings. So, you should consider changing your power settings to see if it will solve the problem.

Here are the steps you need to follow:

1. Press the Windows key + R on your keyboard to open the Run box 
2. Type control panel into the box and click OK to navigate to the next window
3. Select Small Icons under View by and select Power Options 
4. Select the radio button beside Balanced (recommended) and click on Change plan settings 
5. Click on Change advanced power settings 
6. Now expand Wireless Adapter Settings and Power Saving Mode, and then select Maximum Performance from the run-down menu
7. Expand PCI Express and Link State Power Management, and then select Maximum power savings from the run-down menu
8. Click on Apply and then OK.

Restart your PC and check to see if the problem has been resolved. If it doesn’t work, try the next solution.

 

Remove Problematic Drivers to Solve the Driver Power State Failure Problem

Damaged or faulty can also cause the driver power state failure problem. Check the status of your driver in Device Manager. If you see any device with a yellow caution mark next to it, uninstall that device. Corrupted or missing device drivers will always have that yellow mark. If you don’t see any yellow marks, move to the next solution. 

Here are the steps you need to follow to uninstall the problematic driver:

1. Press the Windows key + R on your keyboard to open Run box 
2. Type devmgmt.msc into the box and click OK 
3. Expand the relevant category and locate devices with a yellow caution mark 
4. Right-click on the device and select uninstall 
5. Repeat steps 3 & 4 to uninstall all drivers with the yellow caution mark
6. Restart your PC for the changes to take effect and check if the problem resolves.

 

Update Drivers 

You may also want to update drivers to see if it will solve the problem. 

Follow these steps to update your drivers manually:

1. Open Start 
2. Type device manager into the search box and click on Device Manager from the results
3. Expand the category with the device you want to update 
4. Right-click on the device and select Update driver 
5. Now click on Search automatically for updated driver software. 

Once done, if a new update is available, your computer will download and install it automatically.

However, you face the challenge of downloading the wrong driver, which could damage your computer. That’s why some users prefer using a Driver Updater tool to find the correct drivers, download them, and install them. However, you must choose a driver that is safe to use and reputable. 

 

Refresh Your Windows 10 Computer 

If you did not find a working solution, try to refresh your Windows 10 PC to see if that can solve the problem.

 

FAQ

How Do You Solve Driver Power State Failure?

Follow these simple steps:

1. Press the Windows key + R to open Run box 
2. Type msconfig and hit Enter 
3. Click on the Boot tab and check the box besides Safe Boot 
4. Click OK and reboot your PC

NOTE: To boot your computer in normal mode again, you will have to uncheck SafeBoot by following the same process.

 

How Do I Get Rid Of the Blue Screen on Windows 10?

Here are the steps you need to follow:

1. Right-click on This PC
2. Then go to Properties 
3. Click on Advanced System Settings on the left side of the window 
4. Under Startup and Recovery, click on Settings
5. Then under System Failure, uncheck the box beside Automatically restart 
6. Click OK to save.

 

Conclusion 

Hopefully, you’ve been able to solve the driver power state failure error with the help of this guide. The good thing about the solutions we’ve covered here is that they don’t require you to be tech-savvy. You only need basic computer skills and keenness when following the step-by-step guides.

If you have any questions, feel free to drop a comment, and we’ll respond in no time.